14 
               March 
             HZQ40/160 walking type bridge girder launcher is a new type bridge construction crane developed by ZZHZ to meet the market demand, ... 
           13 
               March 
             1.measuring insulation resistance of overhead crane power line and control circuit to the ground 
and phases shall not be < 0.5  MΩ, the value can decrease 50% in the humid area, after it connects with all electrical equipment lines.
 ... 
           13 
               March 
             When we choose the gantry crane’s matching block who must pay attention to the electric hoist’s basic parameters and quality. ... 
           12 
               March 
             As installing bridge girder launcher but the guide beam suspending in the air, main girder has a larger stress at position of rear middle support leg, max stress 204.7Mpa < allowable stress 240Mpa,  ... 
           12 
               March 
               1.1  MGHZ80/10-27-15 gantry crane drawings, layout of construction field.
1.2《GB50278-2010 Lifting equipment installation engineering code for construction and acceptance 》;
 ... 
           11 
               March 
             The whole overhead  crane is made up of two end girders ,two main girders ,trolley and crane assembly; ... 
           11 
               March 
             1、after the installation of  gantry structure is finished, the diagonal error of gantry's four pivot points should ≤ 5mm. ... 
           09 
               March 
             Environment temperature : -20℃~+40℃
Working system: intermediate JC25%
Heavy class: JC40%
 ... 
           09 
               March 
             The overhead crane is used for lifting melt metal , high temperature substance and other places in metallurgical industry, because the melt metal belongs to the high temperature product, we must pay attention to the following contents: ... 
           08 
               March 
             Steel rope is the most widely used flexural member in the bridge girder launcher, but it is used in kinds of working place frequently, the steel rope breaks easily to make fatal accident or serious trouble. In case of the steel rope break, we need to find the broken reason: ... 
           08 
               March 
             The brake device plays a very important role in gantry crane’s operation to make sure cranes can run correctly and safely. And the collocation of brake device can decide the working life and operating safety. So we choose the brake device from type, specification and environment etc. ... 
           08 
               March 
              In order to finish the girder lifting successfully , when using the crane to lifting box girder  , we must adhere to the process flow,. ZZHZ has very rich installing experience , the matters need attentions are following: ... 
           08 
               March 
             4.	when lifting, in case of swing of steel box girder is too big, we often adopt the transverse girder by manual hoist to control them. ... 
           06 
               March 
             The block is a small lifting tools which is widely used in the hoisting machinery, it and steel rope wind together with winch for lifting weight. In order to prolong the block’s life, we need to do the following steps: ... 
           06 
               March 
             Working condition 6: in the normal working condition, trolley lifts rated loads at side of flexible support leg, and crane moving system brakes ... 
           05 
               March 
             Working condition 1: in the working condition with no wind, gantry crane does not move, trolley lifts rated loads at mid-span; ... 
           05 
               March 
             After knowing the working principle of electric hoist , the maintenance of electric hoist is an important content we must know. ... 
           04 
               March 
             With the upgrading of industrial automation, the frequency converter is widely used in it. The frequency converter has a lot of protection function such as overcurrent,overvoltage and overload protection etc. ... 
           04 
               March 
             With the upgrading of industrial automation, the frequency converter is widely used in it. The frequency converter has a lot of protection function such as overcurrent,overvoltage and overload protection etc. ... 
           04 
               March 
             Electric hoist is a kind of small and light lifting crane with small volume, light weight, simple operation and convenient using. According to the correct steps to install the electric hoist to make sure the safety of electric hoist. ... 
          






